All sanded up.
The stock nut and end of the fretboard looked a bit dodgy and needed some attention. Not just due to a malformed nut face.
The nut is hollow for a start, as expected, but shelf has been cut at an angle and the end of the fretboard is actually curved and needed to be tweaked. Had to double-check with a fret calculator to ensure the 1st fret distance was correct, it was except for the bulging curve upsetting the nut.
It took some time but I eventually got it cleaned up as best I could without cutting the nut shelf any deeper on the bass side.
cont.
Reply With Quote