Rev get a 10mm drill and drill a hole about 5mm deep where the screws will be. Easiest solution and you will have more height adjustment if needed.
Think I had to do that on my kit
Rev get a 10mm drill and drill a hole about 5mm deep where the screws will be. Easiest solution and you will have more height adjustment if needed.
Think I had to do that on my kit
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Reply With Quote
