Well I didn't take a photo of the mock build but after 3 days sanding (off an on) and then trying to decide the design of the headstock I came up with this. All has been sanded down to 400. Did a quick check with the damp rag to check for any left over glue and couldn't see any problems.
After letting it dry (about 24 hrs) I did the first coat of DT Uluru Red. Really pleased with the body but a bit concerned with the neck. It didn't take real evenly. Was this because I sanded down to 400? I'm thinking that once dry (probably Thu at the earliest) I rub back with 240 and apply another coat. Or should I just leave it and apply another coat? The front of the headstock is good, the back is not so good.
Reply With Quote