Quote Originally Posted by Simon Barden View Post
Guitar coming along very nicely.

Where would the logo go? Headstock? You could do a stylised bolt through the logo to go with the 'Franken' bit. And maybe make it 'labs', not 'lab'?

Or you could stick the main part of the logo symbol on the front of the headstock, and have the FGL text on the back of the headstock?

Or run the text in a single line along the bottom of the front of the headstock and have the logo (possibly engraved) on an over-sized truss-rod cover?
@Simon, I did some playing around with the sizing and layout and your suggestion of the bare logo on front and details on rear works really well in my mock up. Once you drop it down to a suitable size for the headstock, you tend to lose the text, and the white border becomes indistinct enough to be redundant.
So for these smaller applications it will be limited to:

Name: HEX-Logo-SMall.gif Views: 795 Size: 1.6 KB

Given that the headstock is slightly lighter than the rest of the body, it should give enough contrast to be visible but not prominent.

I'm going to have a bash at printing a few off and see how they work.