Hey Doc I would sand the bulk of TM off with 240 grit then as most of it is off go to 320 grit and higher grits.
It's worth pre-sanding the body to 240 grit before the TM goes on otherwise you risk sanding it out.
Hey Doc I would sand the bulk of TM off with 240 grit then as most of it is off go to 320 grit and higher grits.
It's worth pre-sanding the body to 240 grit before the TM goes on otherwise you risk sanding it out.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote