I've been meaning to post these since starting this build back in the start of June. Finally got around to it. The plan is to build a deep red marble effect ST with a blinged up pick guard.

All going to plan but the painting is taking for ever!

Here goes

Click image for larger version.  Name: image.jpeg  Views: 211  Size: 362.0 KB  ID: 12911

Click image for larger version.  Name: image.jpeg  Views: 202  Size: 368.0 KB  ID: 12912

Sanding completed and sealer applied.....but wrong type. Had to sand off again and apply another compatible with the acrylic paint I wanted to use

Click image for larger version.  Name: image.jpeg  Views: 211  Size: 227.4 KB  ID: 12913
Click image for larger version.  Name: image.jpeg  Views: 214  Size: 78.9 KB  ID: 12914

Primer coats done and sanded

Click image for larger version.  Name: image.jpeg  Views: 213  Size: 331.6 KB  ID: 12915

Black base coat on. Looking a bit rough, but first outing for my new compresser and spray gun set up. All good after sanding back to remove the orange peel.

Marbling next...