Hi All , sorry this is a bit late in coming and not too detailed but better than nothing .
Any way , the guitar is as follows
LP1-M kit
Tonerider AC4 pickups
Grover locking tuners
Bone nut
Finish is U Beaut wood dyes mixed to suit with an acrylic lacquer clearcoat .
I have encountered an issue with the nut but otherwise no major dramas and
despite the nut issue is coming along OK but I will need to sort this out .
The problem is that I set the height using strings 1 and 6 only ,and set to
a conservative height (hopefully the pix show this ) but after glueing and stringing
found that the 1st fret clearance on strings 3 and 4 was almost zero .
A little tweak of the truss rod and saddle heights got it playable but it does
buzz the first on 3 and 4 slightly . Looks like I will have to crack the nut back out
but I will play it in for a week or so first
Once sorted though and given a proper setup it will be quite a nice guitar .
It still only has the standard kit strings on it so will be better again with the EB's
Reply With Quote