Hi Alkay. Presume you mean the copper shielding in the control cavity? Do your finishing coats first, let it cure, turn when you are ready to assemble do the copper shielding. If you mean shield painting the control cavity don't apply any tru oil in the cavity. I'd still do the cavity after the tru oil coats
Last edited by wokkaboy; 02-06-2016 at 10:10 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Reply With Quote
