Had a bit of trouble putting the wiring into the body, the wires kept breaking at the solder points. Plus the coloured wires were visible through the F hole, so I took all the wires off and started again. This time I made a wiring harness with longer wires and black heat shrink and black mini cable ties. This time it worked perfectly. Sorry no pictures taken due to tiredness. No sooner had I made it,it was installed.
Next job was to glue the neck, no problems there, all went well.
Click image for larger version. 

Name:	20160508_122149.jpg 
Views:	210 
Size:	669.9 KB 
ID:	11296
Next I added the strings and adjusted the bridge hight to get string clearance. Then took some pics for you guys.
Click image for larger version. 

Name:	20160514_135015.jpg 
Views:	225 
Size:	743.7 KB 
ID:	11297Click image for larger version. 

Name:	20160514_135036.jpg 
Views:	208 
Size:	752.1 KB 
ID:	11298
Click image for larger version. 

Name:	20160514_140148.jpg 
Views:	202 
Size:	693.7 KB 
ID:	11299
Click image for larger version. 

Name:	20160514_135612.jpg 
Views:	200 
Size:	668.1 KB 
ID:	11300