ST-1JR ...but it may not end up that way.

[apkane]

At the end of March we took the neck over to Grandpas to use Great Grandpas drill press to sink 4 new holes that we templated up.

Once the drilling was complete, we then ferreted around for some old stain so we could add some colour to the anemic neck.

Lastly we cut and shaped the headstock after finding a suitable shape on the interwebs (it may or may not look similar to a Bill Crook headstock) and making a template with some of the cardboard from the box that the guitar came in.

Here is the neck with the new bass nut.


Now, where did that body go?.....