Quote Originally Posted by wokkaboy View Post
good stuff Doc, DB recommends 3 full weeks curing after last coat before you can polish it.
Gives you plenty of time to do a fret level and get your headstock logo on

I'll have to invest in a good set of fret-leveling tools if I'm going to do any fret leveling,incidentally, when I did my last full mock-up build, I noticed that there was relatively very little fret-buzz on the neck that came with my Strat kit, but maybe I might do a fret level later on.


When it comes to do the polishing of the finish on the body, would I be able to get away with just using a small amount of Brasso on a clean rag, or should I really get some Automotive Cut and Polish, and Swirl Remover, assuming I do the polishing by hand?