Page 32 of 147 FirstFirst ... 22 30 31 32 33 34 42 82 132 ... LastLast
Results 311 to 320 of 1467

Thread: DrNomis_44's Gold Standard STA-1M Build.

  1. #311
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    back of the body looks sweet too Doc, wait till you get more CG coats on and clear coats should look wicked
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  2. #312
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Quote Originally Posted by wokkaboy View Post
    back of the body looks sweet too Doc, wait till you get more CG coats on and clear coats should look wicked


    I think I did at least a couple of coats of the CG on the body last night, so if that's any indication to go by then the body should look even more awesome-er when it's finished, I'm going to be applying a second coat of the final clear coat to the neck later on tonight and then I'll call it done, so then all that will be needed to do is finish working on the body.

  3. #313
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    good one Doc, I think the build should be complete in about a month. Remember give the DT plenty of cure time or DB won't be very kind in the naughty warehouse !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  4. #314
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Quote Originally Posted by wokkaboy View Post
    good one Doc, I think the build should be complete in about a month. Remember give the DT plenty of cure time or DB won't be very kind in the naughty warehouse !

    Will do, I'm not in a real hurry to actually start playing the guitar so I'm not really worried how long it takes to dry, besides DB's a good mate to us all so I really don't want to upset him if it can be avoided.


    I have some extra bits and pieces to order from PBG and Realtone anyway, so that'll keep me busy while I wait for the guitar to dry.
    Last edited by DrNomis_44; 14-03-2016 at 11:40 AM.

  5. #315
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    wise move Doc, when DB is upset in the Naughty Warehouse he has a cow prodder and a bloody loud PA system to tell you off ! haha
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  6. #316
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Quote Originally Posted by wokkaboy View Post
    wise move Doc, when DB is upset in the Naughty Warehouse he has a cow prodder and a bloody loud PA system to tell you off ! haha

    Lol...if I had to choose between upsetting DB and buying him a few beers, I'd buy him a few beers of his choice, besides I really don't fancy experiencing the joys of being prodded by a cattle prodder, or having my ears blasted by a too loud PA system.



    So, by my reckoning, the body should be ready for the intensifier coat this coming Tuesday at about the same time (10:00pm) as when I started applying the CG stain (48hrs).
    Last edited by DrNomis_44; 14-03-2016 at 12:08 PM.

  7. #317
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Hey Doc, 48 hours should be enough, presume it's pretty warm in Darwin ?

    40 degrees in Perth yesterday and almost there now
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  8. #318
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Quote Originally Posted by wokkaboy View Post
    Hey Doc, 48 hours should be enough, presume it's pretty warm in Darwin ?

    40 degrees in Perth yesterday and almost there now

    Apparently Darwin is currently 33 Degrees C, although it doesn't feel like it, maybe it's because I'm sitting next to a pedestal fan.


    Humidity is currently 59%, with Precipitation currently at 51%, Wind is 26km/H.


    I found that out by doing a quick google.
    Last edited by DrNomis_44; 14-03-2016 at 12:07 PM.

  9. #319
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    haha thanks for all the weather stats Doc ! You forgot wind direction haha - don't worry !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  10. #320
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Just out of curiosity, I took the gold bridge, jackplate, and the white pearloid scratchplate from the box my kit came in and placed them in their respective positions on the body, next I placed the neck in the pocket and had a look at the guitar, the gold colour of the bridge and jackplate and the colour of the white pearloid scratchplate works really well with the Coolangatta gold stain on the body with it's highlighted grain, this is going to be one good looking guitar when it's finished.

Page 32 of 147 FirstFirst ... 22 30 31 32 33 34 42 82 132 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •