Where would you start Wokks? At least I only had the one!😉Originally Posted by wokkaboy
Where would you start Wokks? At least I only had the one!😉
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
haha not sure Franken, suppose I would start at one end of the collection and work my way through them. Would help to take 2 or 3 years off work to make the time !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Assign them all a number, then throw two darts at a standard dartboard, the sum is the number you start on. Or use a random number generator.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
haha good advice there Franken, I will work on getting some time off and make a start !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
So what have u done here?
all is in readiness Master....
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
@ Simon, Neck pocket routed, realised that the bridge post locations were out for the scale length on my pine test piece so just making adjustments for that. Dialed in the neck depth and (thanks to your masking tape suggestion) it sits perfectly tight and central.
@Dedman, they said I was mad, MAD, MAAAAD I TELL YOU! Maw hahahahahahahahahHAHAHAHAHA!
Last edited by FrankenWashie; 28-05-2016 at 04:18 PM.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Ah with the neck pocket done the scariest part is over!
Actually you are quite right, the only other area that gets me any where near as nervous is the drilling of the bridge anchor holes
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Posting Permissions
Reply With Quote