Getting a gloss out of wubtone is like pulling chickens teeth.
Doing the best I can with this Junior. None the less I am very happy with the colour.
PK
Getting a gloss out of wubtone is like pulling chickens teeth.
Doing the best I can with this Junior. None the less I am very happy with the colour.
PK
Kellza
(PK)
"Jack of all trades, Master of None"
"You'll never ever know if you don't have a go"
https://www.facebook.com/PaulWKelly
Avatar Image is a "The headstock of my first scratchy"
looking good PK
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Looking great Paul
looks pretty sweet Paul
looks a million bucks there Paul
Projects:
LP-1A
TL1-A
LP-1Completed
TL-1Completed
Yamaha rebuild: Completed
Mako -Scratch designed: Completed
PUP winder: Completed
Facebook : www.facebook.com/andrew.johns.1272010
Skype: andyjohns1
Tks Guys. I apprieciate all your good thoughts.
PK
Kellza
(PK)
"Jack of all trades, Master of None"
"You'll never ever know if you don't have a go"
https://www.facebook.com/PaulWKelly
Avatar Image is a "The headstock of my first scratchy"
I think I may have figured out why I am not getting enough gloss out of the Wudtone Clear Gloss(with age tint). I am thinking the cotton swab I am using to apply it is too course. I am going to let it cure for a few days, then hit it with Super-fine 0000 steel wool and find a nice soft cloth to apply a couple more coats of gloss. then assess and if I am happy put it all together.
Kellza
(PK)
"Jack of all trades, Master of None"
"You'll never ever know if you don't have a go"
https://www.facebook.com/PaulWKelly
Avatar Image is a "The headstock of my first scratchy"
For the gloss with Wudtone I followed some instruction I found in the Pit Bull forums how to build guitar guide. Basically this involved applying your Wudtone top coats, wait a week to cure then apply up to 3 very thin coats leaving a couple of days between each layer. Once you have applied the 3 thin coats wait another week to cure then buff with some photocopy paper. I have tried this technique with good results.
sounds like too much effort - hit it with nitro! ooppss.....
Have that man whipped!!Originally Posted by stan
Posting Permissions
Reply With Quote