Attached are a couple of picks of my latest kit, an ES12G.
Can anyone advise on the best way to deal with these issues on the veneer. Its going to be a Cherry red stain finish.
Cheers in advance.
Attached are a couple of picks of my latest kit, an ES12G.
Can anyone advise on the best way to deal with these issues on the veneer. Its going to be a Cherry red stain finish.
Cheers in advance.
Last edited by Rossc0; 31-12-2017 at 06:17 PM.
#1 LP1-SS
#2 Non PB Vintage Strat Rebuild
#3 TL1 - Custom
#4 ES-12G (now converted to ES-1)
#5 RC4
#6 STA-1HT
#7 Non PB 52 Tele replica
#8 Coming Soon: 1970's Japanese Les Paul Special Resto.
It may be that your whole purpose in life is simply to serve as a warning to others
Should be able to grain fill that with neutral timbermate. it takes the stain quite well. make sure you sand off the timber mate to the wood with 240 then change to 320 or 360 so you do not sand through the veneer whilst also providing some tooth for the stain to hang on to.
If you are concerned about how it will look, put some neutral timbermate on a scrap piece of wood first and stain it to see how it reacts.
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Cheers Andy.
#1 LP1-SS
#2 Non PB Vintage Strat Rebuild
#3 TL1 - Custom
#4 ES-12G (now converted to ES-1)
#5 RC4
#6 STA-1HT
#7 Non PB 52 Tele replica
#8 Coming Soon: 1970's Japanese Les Paul Special Resto.
It may be that your whole purpose in life is simply to serve as a warning to others
Posting Permissions
Reply With Quote