Body woods perth

[Diggydude]

Hello,

Not sure if this is the right area to put this, but I’m interested in making my own electric guitar bodies (necks at a later date) and I’m unsure on where to get woods.

Where can I get the more popular woods such as mahogany, ash, alder e.t.c in WA? Preferably north perth as I’m based around joondalup area.

I’m thinking austim? Anyone had experience?

Thanks.

[Sonic Mountain]

I know this isn't 'local' to you, but these guys are really good to deal with and will ship it to you no probs.

The website is really only a general guide to what they have, it doesn't get updated as much as their stock.

Just send a query based on what you can see there and they will help you out. They probably have other stuff if you don't see anything you like.

https://guitartimbers.com/

[FrankenWashie]

You can also try “The Timber Bloke” based in Naval Base. https://thefinetimbercompany.com.au/enquiries#locations
They specialise in Australian woods. I’ve a gorgeous chunk of Sheoak which was sourced through them.
See: https://www.buildyourownguitar.com.a...ead.php?t=9735

[Tassieaxeman]

If you are selective, you can find nice quarter sawn tas oak, at Bunnings. Alpine ash (tas oak) is superb tonewood. Flatsawn cut and laminated into a "quarter sawn" piece is also good!

[Brendan]

Original Fenders were pine.... Just saying .

[Simon Barden]

But not for long. A very soft wood soft so it dented far too easily. Especially with a thin nitro finish rather than a thicker poly one to help protect it. They cost a lot of money when they first came out. At today's price the 1950 Broadcaster (originally US$170) would now cost US$1824. That's currently AU$3148/£1565. So somewhere in-between a current US Professional and Ultra model. For that sort of money, people expected something that would last a bit longer. Hence the quick switch to ash and slightly later, alder (for solid colour guitars), when ash got relatively more expensive.

[Diggydude]

Original Fenders were pine.... Just saying .

Funny you mention that, I been thinking about making a pine guitar, semi hollow jazzmaster-ish style with a danish oil finish. Still a very valid option.

[Woltz]

Hello,

Not sure if this is the right area to put this, but I’m interested in making my own electric guitar bodies (necks at a later date) and I’m unsure on where to get woods.

Where can I get the more popular woods such as mahogany, ash, alder e.t.c in WA? Preferably north perth as I’m based around joondalup area.

I’m thinking austim? Anyone had experience?

Thanks.

Not in Perth, but you could try these guys who are based down in Denmark on the South Coast. I got a few Fretboards from them. Think I may have posted photos in my 1st scratch build thread. They may have big enough pieces for bodies as well although just check the densities of what they have as they do mostly local timbers which can be quite heavy.

https://djarilmari.com/