Hello my friend is after a Explore.. but he can't find any wiring diagrams.. It is also a 5 string as well
Cheers
Sheven..
Hello my friend is after a Explore.. but he can't find any wiring diagrams.. It is also a 5 string as well
Cheers
Sheven..
Hi Sheven, being 5 string I presume its the EX-5 kit ?
http://www.pitbullguitars.com/shop/g...ss-guitar-kit/
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hi Sheven, the YB-4 diagram will work, just presume there are 2 humbuckers.
The EX-5 kit has 2 volumes and one tone so this will work
http://www.pitbullguitars.com/wp-con...f/PBG-YB-4.pdf
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hi Sheven,
I finished an EX-5 about 2 months ago and it is wired up exactly the same as a Fender Jazz Bass being 2 x volume & 1 x tone. It is really quite simple and even though the humbuckers are 4 wire conductor from memory I think a couple were already joined up which were left alone leaving just the hot & ground wires to hook up.
I googled J Bass wiring diagrams which produced plenty of results to pick from.