Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Hi from SE QLD

  1. #1
    Hi all

    Hope you're all well. I'm a total greenhorn when it comes to building guitars, and I'm on the verge of ordering my first kit - a lefty LP-1SS.

    I'm a drummer and bass player, and I've been chasing a decent affordable guitar that I can use for my own personal noodling and recording a few demo tracks with. I've been looking high and low for a decent lefty guitar that's affordable and isn't a Fender, Fender copy or a crappy low-end Ibanez, Schecter or LTD. I'd all but given up hope.

    And then I found this site...

    Kid in a toy shop and all that.

    It's taken me bloody ages to decide which model I want to start on, but I settled on the LP-1SS because I like the Gibson look more than Fender, and the spalted maple looks pretty sweet.

    I still don't know which finish I want it to be yet, but I have a few months yet to make that decision.

    Any suggestions would be welcome, but regardless, it's nice to meet you all and gain inspiration from this forum.

    Cheers!

  2. #2
    Overlord of Music
    Join Date
    Aug 2012
    Location
    Brisvegas
    Posts
    3,356
    Welcome fellow Queenslander. Don't be afraid of asking for help. The only stupid question is the one that never gets asked!
    'As long as there's, you know, sex and drugs, I can do without the rock and roll.'

  3. #3
    Welcome Timsan, good choice with the LP-1SS it's a nice kit. Once you receive your kit the look and figure of the spalted cap will be your best guide in deciding which finish to use, as each one is unique with different levels of spalt and flame. The hardest part is always to not rush the build.

    Good luck and may this kit be the first of many... even if they are lefties.
    Scott.

  4. #4
    /<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/Quote from WeirdBits on September 7, 2013, 17:02
    The hardest part is always to not rush the build.
    That will be my potential Achilles' heel... I must be careful.
    I'd love to do a burst, but I'll probably steer away from that on my first build. Finding that one colour that really makes the guitar come alive will be the challenge. I'll have a poke through the galleries to get some ideas.

    even if they are lefties.
    What are you incineratin'?

  5. #5
    /<\\/p>[]<\\/p>/Quote from pablopepper on September 7, 2013, 16:28
    Welcome fellow Queenslander. Don't be afraid of asking for help. The only stupid question is the one that never gets asked!
    Thanks, Pablo. What part of QLD are you from?

  6. #6
    Mentor robin's Avatar
    Join Date
    Feb 2013
    Location
    Brisbane
    Posts
    1,513
    Hi Timsan,

    Welcome to the PBG Family. A Brissie-ite here.

    To follow on from what Pablo said, there are no stupid questions, only stupid answers. And as Weirdie said, don't rush the build. We were all noobs at one stage, but thankfully there is a wealth of information here.

    Enjoy the build, and get ready for an addiction that is hard to break.

    cheers
    rob

  7. #7
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    Welcome to the funny farm.....

    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....

  8. #8
    Hi man. I'm from the south side too.

    I found the longest part of my first build was just thinking through each step along the way. Take your time and make sure you understand what and why you are doing each step, and you will learn a lot along the way.

    Don't forget to ask any questions, the guys here are always very helpful.

  9. #9
    Thanks lads. Nice to know that the forums are alive and well here.

    Props to Adam for being a great guy. I emailed him about the kit this morning, not expecting an answer till next week. He got back to me straight away, and answered all my queries. I have a hard time getting any of the music shops to reply my queries, let alone take me seriously when I ask for an "affordable left-handed guitar that isn't a strat copy or a cheap metalhead axe."

  10. #10
    Member
    Join Date
    Jun 2013
    Posts
    414
    Welcome Timsan to the PBG clan

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •