Search:

Type: Posts; User: LeighB

Search: Search took 0.00 seconds.

  1. Thanks Sonic! I see the code 👍

    Thanks Sonic! I see the code 👍
  2. Finished the burning process!! (imgur link below)...

    Finished the burning process!! (imgur link below) I'm going to let it dry for a week << is this long enough?? before I stain it with a darkish ceder satin stain. Also I'm going to swap out the white...
  3. Time to file the edge of the frets! :D I made a...

    Time to file the edge of the frets! :D I made a fret protecter thing out of an aluminium can, they work awesome and they're so thin they even get slightly underneath the frets so i can file the...
  4. I hadn't put down any protection on the table i...

    I hadn't put down any protection on the table i was working on and now i've dirtied and dented my neck :( I'll put a towel down from now on.

    32075
  5. After levelling I sanded the frets using a normal...

    After levelling I sanded the frets using a normal aluminium spirit level that i attached some 360 grit sandpaper to the bottom using double sided tape. The frets above the 12th fret seemed to be much...
  6. I made a straight edge using an extra long metal...

    I made a straight edge using an extra long metal ruler and a file although it seems after filing it bowed a little bit so i used this in conjunction with other levelling techniques (eyballing, wire,...
  7. ST-1 Lichtenburg Fractal Burn Strat (First build)

    This will be my first ever guitar build. I'm building the ST-1 strat kit from Pit Bull Guitars, this has a basswood body and maple neck with rosewood fretboard. I also opted for Grover locking...
Results 1 to 7 of 7