Take 2. Rubbed back until it was totally flat . Then I’ve Re coated it with cabothane clear gloss. Rub that back again until totally flat with 2500 wet rub. Polished it with Meguiars ultimate...
Type: Posts; User: GavinPinksterboer
Take 2. Rubbed back until it was totally flat . Then I’ve Re coated it with cabothane clear gloss. Rub that back again until totally flat with 2500 wet rub. Polished it with Meguiars ultimate...
Awesome thanks sonic mountain
Sent from my iPhone using Tapatalk
Hi all , I’m finishing up the body on my first build ....it’s been quite a journey of learning from my mistakes but it’s nearly there
Anyway I’ve polished through a small area of the clear coat and...
Thanks for the advice Ricky , I’ll clean it with wax and grease remover give it a really light scuff over and keep going with poly.
Still learning how to use the forum thing haven’t done this...
Finished applying the poly to the body , have scraped bindings and cut and polished. Just not sure if I kept applying the poly that will fill
the pores in the timber and make it glassy or it’s ok...
Build 1 has been put to the side in mild disgrace so I can contemplate it’s future , press on or sand back.... got the poly on with a coat every day this week. Had a couple of little runs near the...
Hi all , I’m a good way through my first build having dealt with all the usual learning curve dramas including sand back and starting again more than once[emoji1787]. Any way I thought I’d post a tip...
Thanks Darkmark appreciate the reply.
I’ve ordered 3 different kits waiting for the first one to arrive so I can get into it.
Sent from my iPhone using Tapatalk
Hi, apologies if this has been asked and answered before but there’s a few things I’m unsure of before I start my first build . I have ordered an ES-1f which I intend to stain cherry red with...