Search:

Type: Posts; User: ghalalb

Search: Search took 0.00 seconds.

  1. Strung and done! Nearly........ Needs a nut file,...

    Strung and done! Nearly........ Needs a nut file, a little more work on the bridge, some more polishing, string trees and strap buttons. It plays nicely, will post some more photos and sounds...
  2. Decaster - Tele Deluxe,...

    Decaster - Tele Deluxe, geddit?.......https://uploads.tapatalk-cdn.com/20190824/4646cbe3ac15ba9a8ca1466b8eea82d9.jpg

    Sent from my SM-T700 using Tapatalk
  3. Tru-oiled, rubbing compound after some 0000,...

    Tru-oiled, rubbing compound after some 0000, machine heads in, and a little model number homage to pitbull on the back of the...
  4. Replies
    29
    Views
    11,180

    I noticed an angle to my neck when i fitted it as...

    I noticed an angle to my neck when i fitted it as well. It's maybe not as pronounced as yours though. So i laid the guitar flat and measured the fretboard height at the neck pocket and then at nut...
  5. Doh! I just discovered I used the A and B pots...

    Doh! I just discovered I used the A and B pots the wrong way round...... Oh well I'm an all on volume and tone player anyway......

    Sent from my Nexus 5X using Tapatalk
  6. 99% there on the wiring, ran short of connectors...

    99% there on the wiring, ran short of connectors to do it all but that can wait.

    Time to sand some primer off the body and give that a last coat of primer before top...
  7. And now a little soldering. Rather than solder...

    And now a little soldering. Rather than solder everything into the body I'm going to use some connectors so i can remove everything easily if need be.

    So far the only real challenge I've faced was...
  8. A bit of priming going...

    A bit of priming going on.https://uploads.tapatalk-cdn.com/20190811/22297d23cc033ce0dbbf9baebbac5d8e.jpghttps://uploads.tapatalk-cdn.com/20190811/136e77880e1aa6e04a621b5f1a404a36.jpg

    Sent from my...
  9. Bridge ,neck and pick guard drilled and fitted....

    Bridge ,neck and pick guard drilled and fitted. Now off they come for finishing. All going well i think.......https://uploads.tapatalk-cdn.com/20190804/213e7f778ba730c9fbc9a64627e9677e.jpg

    Sent...
  10. Roger that, I'll back hit it with some 320 to...

    Roger that, I'll back hit it with some 320 to open it up.

    Sent from my SM-T700 using Tapatalk
  11. Question, i'm going to tru-oil the neck. I've...

    Question, i'm going to tru-oil the neck. I've sanded everything down to 1200grit except the fret board. Should I sand that too?
  12. Mountain Biking, flying down the trail feeling 21...

    Mountain Biking, flying down the trail feeling 21 again, crashed, looked at my buckled wrist, felt every 46 years I am!

    Thanks for the advice, appreciate it!

    Sent from my Nexus 5X using Tapatalk
  13. Shaping the Headstock. I was very conservative...

    Shaping the Headstock. I was very conservative with my cutting, and have been sanding heaps. Still a bit to do, the round end looks a little boxy still. I'm happy so far though.

    My main motivation...
  14. Thanks. I was going to set the neck first to...

    Thanks. I was going to set the neck first to figure out where the bridge should go, but after you mention this maybe i should centre line the body, find the bridge location from a loose neck and then...
  15. TL-1HA First Build.... how hard can it be.............

    Hello all. Well finally it arrived! My first build! More than a little nervous.........

    I'm keeping it simple with a TL-1HA. I'll probably do a CBS style headstock, but otherwise keep it as simple...
Results 1 to 15 of 15