Search:

Thanks for the tip! I decided to take all of your advice and go with a lacquer clear coat. I also decided to attempt to do a wooden pick guard out of 3mm thick black walnut, which turned out to be...

Hello all, Small update I thought I'd share what I've done with the neck so far. I cutout a strat ish headstock shape then, I routed off 2mm off the top and glued on some black walnut, I also dyed...

McCreed I really dig that blue, I bet it'll really shimmer in light especially once you've gotten it all polished up. I might even have to borrow that rounded corner idea maybe even add a bevel to...

That is one hell of a carve! I like the look of that, how did you do that? Belt sander or did you take the majority of it off with hand tools?

Something like this should work. Repeat for each volume pot. *correction Lug 3 should be connected to ground.*

I imagine it would be possible. All you would have to do is wire the signal from from the volume pot through the switch in the pot instead of through the normal switch.

The ferrules in the picture are just mockups, based off of the ones that stewmac sells. I plan on getting the black ones with gold screws. I think it would be a nice contrast to the blue. I wouldn't...

I definetly agree with you McCreed. This is where I'm sitting after 5 or 6 coats of blue stain with various amounts of dilution. The stains I'm using are Saman water based (108 Black and 106 Azure)...

Thanks for the advice. I thought I'd give it a go and I really watered down the black stain and let it soak in and then sanded it back with some 320 grit. Then applied the blue over top. I call this...

Hello all!

I decided to start my third Pit Bull build, A STAF-1! Seeing as I havn't seen to many build logs for this one I thought Id share my own.
Color scheme for this one is going to be black...