HAHA yes double checked the table with a spirit level and this angle tool adjusted a few areas to make it spot on then checked the neck angle will keep you posted cheers
Type: Posts; User: Adam Gilmore
HAHA yes double checked the table with a spirit level and this angle tool adjusted a few areas to make it spot on then checked the neck angle will keep you posted cheers
Ive levelled the frets and done a little more cleaning in the neck pocket. while I had the chance I measured the neck angle. it started out as 6 degrees as in the photo, after a little more cleaning...
Ive went over a few things you both mentioned. thanks for the advice.
I found some of the routing was preventing the neck from seating properly, so I cleaned this up with a chisel.
I tried...
No worries thanks
Thanks and thanks for the info . I have adjusted the truss rod once the strings have been up to tension for a few days. I have not leveled the frets but did run a straight edge over them to check non...
I have nearly finished my 1st kit guitar LP-1S its been a great experience. I have a few small wiring issues to sort out as I only have the bridge pick up working.
I have a question about the...
Dumb question time.... There is a lot of room to move the duel humbuckers around in the cavitys. I have both e strings on is it as simple as having the same about of gap out each side of the string...
Has anyone ever used a feast Watson product called glass finish . One coat is equivalent to 60 clear coats and is normally used on kitchen bench tops. I've seen a sample at bunnings and wondered how...
Hi All
my wife got me an LP-1S for Christmas first kit guitar.
I had one question about the neck and body pocket connection on it even though the neck is all the way in and firm there looks to...
Has any one had any experience with printed vinyl wraping guitar body's ?