Yes Wokkaboy, it is an SG1 basswood model. Ha ha not sure it's worthy of a GOTM nomination. But I'm really happy with it, It's not perfect, but it's the best I could do, hopefully when I do another...
Type: Posts; User: daleweise
Yes Wokkaboy, it is an SG1 basswood model. Ha ha not sure it's worthy of a GOTM nomination. But I'm really happy with it, It's not perfect, but it's the best I could do, hopefully when I do another...
Here's the end result, I'm very happy with it, cheers for your help guys!
Hey guys, well I've been playing it for over a week now and all is good, cheers for your help :)
Thanks guys, I'll try the drill now, and raise the tailpiece and let you know how it goes.
both times where the string wraps around the ball, there's no string left on the ball.
http://www.pitbullguitars.com/wp-content/uploads/2014/10/3r7a1-291020141731.jpg
Hi guys,
Since stringing my SG1 guitar, I've had two E strings break in the tail piece, the first was the one with the kit and the second a D'adario string. Any thoughts?
cheers
Dale
Hi guys, I got the neck off, and while it is off I thought I'd do something with the headstock, I also put a few coats of gloss clear on the body. It was marking too easily, so I'm hoping this will...
Cheers guys, there is a Masters near where I work, I'll pop in there tomorrow. Are we all certain this needs to be done?, I'm just concerned it may warp the timber?
sweet wood grains!
Cheers guys on the glue thing. It's Aquadhere PVA wood glue. Is Titebond a brand of glue? I'll get down to bunnings and look for it. Do I steam the neck off from the back of the guitar?
I'm not sure what that blob was, but after some more sanding and staining it went away.
I used decking oil to give it a satin finish.
Then glued the neck, that was a bit fiddly, I got my brother to...
Thanks Gav, it was a bit of a guessing thing, I just add the ink to some water, then wipe it on, then added more ink to make it bluer, I did about 5 coats. The guitar is actually nearly finished, I...
cool, I just wasn't sure if pick ups are a generic size and would fit in my Legend strat copy.
I ordered a set, but don't recall being asked a colour selection?
This is my first build. Using water based ink from a direct to Garment printer, I start with black, then cyan, then more cyan....
Thanks Adam,
Looks like they will fit!
cheers
Dale
Hey guys,
I'm considering purchasing a set of tonerider vintage pickups for an old strat copy that I've had for years. I just want to check the size of them to make sure they'll fit. The current...
Hi guys,
Basically it's a water based ink from a direct to garment printer(for printing shirts)
I got the idea from a guy on youtube. You start with a container of water and add some ink.
I...
Hey everyone,
I'm Dale from Brisbane, working on an SG1.
So far so good.
http://www.pitbullguitars.com/wp-content/uploads/2014/09/b2942-21082014142.jpg