Was chasing this one when I first looked at doing a bass, but pitbull had stopped selling them so I ended up doing a zebra jazz bass that I am more than happy with. I had pretty much stopped looking...
Type: Posts; User: Rossco381
Was chasing this one when I first looked at doing a bass, but pitbull had stopped selling them so I ended up doing a zebra jazz bass that I am more than happy with. I had pretty much stopped looking...
If u are still interested in selling it I am only over at Sheldon and can meet up most days at some stage.
Hey Tony, I realise this ad is 6 months old now - i have hust seen it. Did you end up getting this sold?
Thanks guys. Not sure which way I will go with it. Just trying to come up with ideas.
I am looking for a ukelele kit for the old man as a birhtday present and am not sure where to look. I have done a bit searching around on the inter-web and can’t find what I am after! Had anyone here...
I am in the middle of the same kit. I sanded round the edges pretty hard to clean up marks but only lightly sanded top and back as I still wanted some “grain marks” to be visible and just feel-able....
401344013540136 woo hoo. Couple little things that I might do differently next time in regards to finish, but I am pretty dam happy with this one. Ended up with bone nut, adjustable roller bridge,...
Thanks Simon. I shouldn’t have been so nervous about removing anything to have a look. It turned out I didn’t need to remove anything anyway and it seems to all be in working order.
Is that the hb4? I think u may struggle to shield them being a hollow body. I am only new to this but I had the same thought with a different hollow body kit (gr-1sf). It took me a couple goes at...
[Oh my! The GR..] seconded, or maybe that was thirded! If only I was close to that I would be over the moon.
Sorry. Still trying to work out quoting thing. Man I live in the past!!!!
Just...
Yep. 15inch. According to Dr google it is a 15" eminence made 8ohm 100w speaker made in the 43 week of 1987. Well over 20 kg i am thinking and bloody solid.
Success. Little bit of electrical contact cleaner soaked on a piece of dowel slightly smaller than 1/4". Measured the length and shape of input jack and worked in and out a couple times. Little bit...
How long have u had it before checking? My djz4 had quite a bit of movement in the neck straight up. After leaving it open while I deliberated on finish, headstock design etc for a couple days the...
Bit old I realise and may have fixed it, but a bit of masking tape either side of the "run" can act as a bit of a guide for height for the razor and protects the finish as well. Then minimises...
Was thinking that. Is only 2 of us at any one time playing anyway. I have gotten by up till now with a single small amp, so i think we should be right. Apparently has not been used for quite a while,...
I think this is the right place for this...
I realise that this is made as a keyboard amp but a couple reviews I have looked at say good for bass and acoustic electrics. The best part is that my...
Pretty ordinary easter weather! Actullay is normal easter weather come to think of it.120ml??? Can't paint, can't mow. Just gonna have to sit back with a couple beers and the acoustic to practice I...
With the rain and generally crappy day in Brisbane I could no longer resist. Had to have a look and see how it might come up.....3996339964
Think I am gonna be reasonably happy with the look of...
Ahhh. That's where I was wrong. I think maybe I just assumed chemically bonded when I read it bonded to the previous layer. Will see how it goes in a couple weeks time for its final finish....
I do a very light wet sand before last coat, or maybe second last depending on how happy I am with the lay of the clear. I find this gets rid of any small imperfections or contaminants.
My...
Final coat of clear done (I hope)!!!! Woo hoo! Now to try and bring out my patient side to let it all cure before cut and polish.
39936Todays mission.... from this .... to this 399373993839939
Ozz, was the disappointment the colour or the quality of the finish? Did the black come away revealing something nasty I should be looking for???
Sorry to say I did not. I went black too. Have not put them with the head yet but will do tomorrow now.
3991539916 Got some time to get a start on build 2 over the last couple days. Still looking for a bit of grain “feel” to be there but with a nice glossy finish. Completely undecided on headstock...