Question for the brains department.
I have a AST-1QB Kit amd Dingo Tone stain not sure of the name,its a red colour.
How to i get the grain to pop under the colour.
Cheers
Bundy
Sent from my SM-G991B using Tapatalk
Printable View
Question for the brains department.
I have a AST-1QB Kit amd Dingo Tone stain not sure of the name,its a red colour.
How to i get the grain to pop under the colour.
Cheers
Bundy
Sent from my SM-G991B using Tapatalk
Maybe dozymuppet will chime in here...
He did a "Q" top that I'm still envious of!
CLICK HERE
Oh hey that's me...
I used U-Beaut water-based dyes. I did an initial diluted coat of the (green) black, and carefully sanded that back once dry. So rather than grain filler, use dye.
Sent from my Pixel 4 using Tapatalk
Yep, what he said.
Sent from my Pixel 4 using Tapatalk
Soooo single layer application, sand back, then final colour? Haha
Simple enough, even for me.
If you're in the US: http://www.ubeaut.com.au/distribs.htm#USA
And if you're in Canukistan: https://www.leevalley.com/en-ca/shop/tools
Seems pretty available around the EU and UK as well.
Hey Dozymoppet,
Did you wet down the top first as per on the website or straight into the dye.
Bundy
Sent from my SM-G991B using Tapatalk
Straight on with the dye. It's water based, so it will probably make the grain raise a bit, which you will then lightly sand back.