-
January 2018 GOTM
January Guitar of the Month (for Guitars and Basses finished in December 2017)
Enter your finished guitar or bass here to be judged for the Pit Bull Guitars January 2018 Guitar of the Month.
Please remember:
For Guitars or Basses finished on (or before) the end of December 2017
One guitar/bass per member per month
It must be a Pit Bull Guitars kit (mods and upgrades acceptable)
Guitar or Bass must be finished and playable
We need at least 4 photos:
· full guitar shot from the front;
· close up of the body finish;
· shot of the back of the guitar; and
· close up of the headstock (please, no brand name logos)
Please post your photos in this thread. If you are having issues posting photos on the forum, please email them to brendan (at) pitbullguitars (dot) com
Please note: This competition is open to amateur guitar builders only. If you are making and selling guitars for profit, you are ineligible. Also while there are some stunning guitars around - you never know what the judges are looking for, so we encourage anyone who's built a Pitbull during the month to enter!
Competition for January closes at the end of December 2017 (Perth Western Australian time).
The sorts of things we judge on include:
· How well has the body and neck been prepared
· Is the choice of finish for the style of guitar appropriate
· How well has the finish been applied
· How well has all the hardware, pickups, etc, been installed
· Does it have the "Wow Factor"
· Which guitar would you make a beeline for in a guitar shop. That is, which one would you most like to take home.
BTW - remember that the winner is invited to be a guest judge the following month!
-
I'll kick things off with the Rellicaster. Very straight forward build resulting in a nice tidy guitar that is a lot of fun to play and sounds really distinctive. Only upgrades are Grover locking tuners. Painted in automotive acrylic. Minor mods to the bridge route for both intonation and appearance.
Lots more pics and process in the build diary.
https://i.imgur.com/NgUMT7cl.jpg
https://i.imgur.com/MfqRemZl.jpg
https://i.imgur.com/pnNp4ZFl.jpg
https://i.imgur.com/n4IFW3Jl.jpg
https://i.imgur.com/Vz9G3Fhl.jpg
https://i.imgur.com/8hrsugll.jpg
https://i.imgur.com/GLV8GdWl.jpg
-
nice one Sonic good start to the new month ! Love the shade of blue and maple neck work really well
-
4 Attachment(s)
and hot ( and humid) off the presses, finished this morning, the Bird! (it's the word ya know)
Kustom RD ordered by someone else and the factory used the wrong veneer.
Stained in walnut FW stain, top coated in auto acrylic clear. I didn't get it completely flat if I had more clear and it wasn't so hot and humid I may have kept going with more coats and filled the couple of deep grain divots in the top. On the back the grain is just noticeable enough to let you know its wood. Kinda suits the walnut I think.
The kit had 2 pot holes a 3 way switch hole plus a jack socket in the edge. I filled the jack socket with a peice of meranti and moved the jack to the top. The kit came with no hardware or covers, the switch housing cavity was longer than usual so I made up a cover from brass plate and used an off cut to make the truss rod cover. Tuners are open back Wilkinsons, not exactly fine ratio but the Shcaller bridge has finer tuners. Roller bridge is a Wilkinson as well. Pick up is a GFS Dearmond Dynasonic style single coil. It sounds like a cross between a P90 and a Fender Jazzmaster. I used 250K CTS pots a gold Switchcraft jack socket and a .022 Vitamin "T" capacitor as there was heaps of room in the cavity. Gold knobs from Ebay :P I was amazed to find the intonation required very very little adjustment, it's now strung with 10 to 46 Slinky's.
Attachment 23539
Attachment 23540
Attachment 23541
Attachment 23542
-
Nice one, the brass looks great on the walnut colour.
-
well done Deddy you are pumping out the axes ! Nice colour and hardware go well. Looks like another tough month to judge already !
Is the TRC and control cover brass ?
-
yes Wokka 2mm plate brass.
Last build for a bit, too hot plus saving for my trip in April
-
4 Attachment(s)
Hi all.
Playing my LP-1SSP now. Sounds great :)
Finished in Dingotone Outback Sunset, only upgrade was to Grover tuners. All cavities Copper lined. Finish is not perfect but I suspect the weather may be playing around with the top coat a bit. I will give it another going over in a month or so.
Attachment 23650
Attachment 23651
Attachment 23652
Attachment 23653
-
looks great Buzzard but no headstock shaping ? Doesn't take much effort to put you own shape on the top of the headstock
-
Thanks,
To be honest, I just didn't have the heart to chew up the spalting.
Others I have built, I have shaped the head. I've even got an oscillating drum sander to do it with :)
I just didn't mind the stock shape.