ES12G Bridge Post Dia Measurements
Quote:
Originally Posted by
Fretworn
Welcome SWER. I don’t recall anyone else having this issue, but that doesn’t mean it hasn’t happened before. Plugging and re-drilling is probably the best option. But first I’d try and measure the hole diameters, it may be a hardware issue rather than the holes being too large.
Thank you very much for the response and information. Kit hardware diameter measurements for the posts are .411 at the end and .447 at the splines.
Pre-drilled holes in the guitar body measure .450, .452, .451 and .450 respectively.
I have some extremely thin like "skin thin" mahogany that I'm thinking on epoxying in as an inside lining in the pre-drilled holes.
Information on other options are appreciated.