-
Dingotone boo boo
I had sanded my guitar down to 1200 then after receiving my dingotone and Instructions, I sanded the guitar again with a 400. On applying the stain, there were a few spots where stain was not getting through to the wood. I assumed that I had over sanded these spots with the 1200 grit and when I sanded again at 400, most of these unstained spots were in the curves as if I didnt get them sanded to 400.
I decided to give the spots a sand and reapply, but they only got worse. I am at 4 days and I dont know whether to keep going and accept the flaw or try and find a solutiion.
I certainly would appreciate hearing from anyone who has had a similar problem or anyone who might have a solution? Thank you :p
-
Hi wheat, are you able to post some photos. It would definitely help us work out what is going on.
-
Try to upload picture
Uploading picture failed :(d
-
The forum uploader is a bit finicky with image size and resolution. There are a couple of ways you can get images in your post. I like Imgur, which you can use by following the instructions in this link:
https://www.buildyourownguitar.com.a...ead.php?t=8108
-
1 Attachment(s)
Attachment 31982 Finished my Explorer Style Guitar today, I did a modification, moved the toggle switch to where it should be on the top point and added another tone knob, where the switch had been.
-
Thank you very much, the finish is looking better after taking the step to continue with the Intensifier. Ill still try and get pics up.