Squeeski's RD4 Bass build diary...

So... 2 days to get from Oz to the UK, then 14 days to get from London to Leeds via customs!! And I'd completely forgotton about customs charges... lesson learned! But it's here... happy Christmas to me!

Really looking forward to this, it's something I've always wanted to do.. and as I've said before.. getting a genuine RD Bass would mean selling my kidneys.

Everything seems present and correct... the wood's in good nick, only a couple of very minor dints that will sand out. So I'm a happy bunny.

https://i.imgur.com/MeF5k5X.jpg

My intention is to use a Wudtone dye kit with a satin finish in a fetching teal colour with silver highlighting. I'll likely install a set of entwistle neodymium pickups, use a different wiring loom, and put a hipshot extender on it (if my ultralite extender will fit). The 3 point bridges are much maligned, but I'll persevere with it.. I've had them on 3 Tbirds I've had previously and never had an issue... but if it irks me that much I'll look at a hipshot replacement down the line

My first ever build so I'm sure I'll have queries for all the oracles on here... the first being.... the neck is a nice tight fit.. but there's an overhang of the fretboard... is that normal with these kits? Or will I have to sand the pocket a bit?

https://i.imgur.com/A7hP11D.jpg

Cheers guys...

Sounds good. Take your time and it will all work out fine.

I think you'll find the Fretboard overhang is intentional. You can trim it back, reshape it or leave it as is depending on what grabs your fancy.

Quote:

---

Originally Posted by FrankenWashie

I think you'll find the Fretboard overhang is intentional. You can trim it back, reshape it or leave it as is depending on what grabs your fancy.

---

Ah cheers for that... I'm no woodworker so I think I'll leave as is... in fact I'm sure my first Tbird copy had an overhang... as do I nowadays! All's good :)

Quote:

---

Originally Posted by squeeski

Ah cheers for that... I'm no woodworker so I think I'll leave as is... in fact I'm sure my first Tbird copy had an overhang... as do I nowadays! All's good :)

---

😂🤣 don’t we all champ! The belly cut becomes less a ‘nice to have’ ergo feature and more of a mandatory requirement!

Quote:

---

Originally Posted by FrankenWashie

😂🤣 don’t we all champ! The belly cut becomes less a ‘nice to have’ ergo feature and more of a mandatory requirement!

---

just my luck this doesn't have the contour... I shall just have to let it hang over the "waist" of the bass haha

Play it low slung a la Krist Novoselic! Whip that hair! Rage against the midlife, that’s what I’m doing! or at least I would but I’ve a dodgy ankle ....and the hip is tightening up...🥺

its less rock rock and roll these days and more wobble and rotate slightly until something clicks....😭

So I'm plodding along nicely with my first build and really enjoying myself into the bargain. Body is finished and curing away...
https://i.imgur.com/m2gvmb5.jpg
I wanted a semi transparent satin finish.. which is what I've got. Won't Be to everyone's taste but it doesn't have to be! ;)

Neck has been finished with a good lashing of Danish oil...
https://imgur.com/gallery/CBZ3Bw7

Headstock gone black.. ready for a custom logo and lacquering...
https://i.imgur.com/5p433A4.jpg

Got a more "Gibsonesque" bell shaped TRC and customised speed knobs on order... the Entwistle Neodymium pups and wiring harness came last week.. so will be all systems go next weekend for starting on the electrics and the body hardware I think.

Exciting times ahead....

So..I've just finished my first ever build 😊 quite pleased with myself... it works... and nobody died! 🤣 So here is my RD Bass build.

https://i.imgur.com/amOiJh4.jpg

https://i.imgur.com/3PW5vbW.jpg

https://i.imgur.com/iRM29PT.jpg


https://i.imgur.com/2G4KHKN.jpg

https://i.imgur.com/2YriNQz.jpg

body finished in Wudtone "lady teal" to a kinda semi transparent satin effect. Neck (bolt on) finished with a liberal splash of Danish oil... fretboard treated with F-one oil. Headstock painted black and gloss lacquered. Logo is my wife's creation. (It's an in joke, too long to explain!) I also stuck a more gibson-esque TRC on it.

All cavities shielded with copper tape.... set of entwistle JBXN jazz bass installed and got a good quality solderless wiring loom. I'll persevere with the stock machineheads and bridge... they seem to be doing what they need to well.

Plays really well and sounds great! Can't wait to stick it through my ashdown stack and waft trousers! 😁

Nice work. I like the colour

Looks great! unique colour and it's co-ordinated with the furniture.
cheers, Mark.

Quote:

---

Originally Posted by king casey

Looks great! unique colour and it's co-ordinated with the furniture.
cheers, Mark.

---

Cheers!

It was the only way my missus would allow it in the living room! ;)

Looks great, and I love the headstock logo. Your better half has done a fantastic job on it.

Sent from my SM-G955F using Tapatalk

Quote:

---

Originally Posted by G-Axe

Looks great, and I love the headstock logo. Your better half has done a fantastic job on it.

Sent from my SM-G955F using Tapatalk

---

Cheers! Aye, she's alright really... sometimes! Haha

I'll give her feedback tho, she'll be chuffed :)

Great job!