Howdy everyone, ive used pitbull products for a bit now. Didnt really decide to join up till now. Seeing as ive got a custom kit on the way i thought id say hi. :D
Printable View
Howdy everyone, ive used pitbull products for a bit now. Didnt really decide to join up till now. Seeing as ive got a custom kit on the way i thought id say hi. :D
Hi and welcome! How have your other builds gone? Worth posting some photos here?
Ive got a lp set neck i did a while back, i did this relic'd grunge front on it, esp pickups, 1meg ohm pots, bone nut and hipshot locking tuners. Ill see if i can get some pics for it. Its good but i think there as a grounding issue ahah.
We're here to help if we can.
Cheers, i might try to get some help with the wiring on a day off, i thought it was the bridge wire not grounded properly. But its squeals horribly still.
High-pitched squealing sounds more like a microphonic pickup. It doesn't stop when you damp the strings as it's the windings in the pickups that are vibrating. The length of wire that can vibrate is only about 5cm/2" maximum, so the pitch is high. Can happen even to wax potted pickups if the wax hasn't penetrated all the windings. High gain and loud volume normally kicks it off. Of course there are deliberately non-potted pickups, like true PAF copies, but scatterwinding of the coils makes them less likely to suffer badly from it.
It can also happen on covered pickups if there isn't any (or enough) wax between the cover and the coil to stop the cover moving with the sound vibrations.
Welcome Mr Bushy Man. Curious to know what the custom kit might be?
Cheers, Waz
Yeh initially i thought it was a pair of toneriders i had because of the covers, but they work well in another guitar i have.
Hey Waz, its an IB-7, reverse headstock. Triple black and white binding, ash body, flame maple veneer, ebony fretboard and routed for a hardtail. Been waiting since the end of Jan, man im keen for it!
Welcome Bushy!