Savs JM-1

Ok, hey everyone, just started on my first build, thought I should contribute to the diary room and welcome any advice you guys might have...
I did a quick assemble and it all looked pretty good, though I had a few concerns about the rough routing on the body where the neck fits in...Also, felt like the neck wasn't fitting in as snugly as I hope it would, and wanted to drift off to the side a little bit... But Adam assured me that this is all pretty normal, so I decided to start on the paint job... see my next post...

http://pitbullguitars.com/wp-content...2-IMG_1093.jpg
http://pitbullguitars.com/wp-content...a-IMG_1090.jpg
http://pitbullguitars.com/wp-content...6-IMG_1086.JPG

Well, I started of by sanding both the neck and the body with some 240 sandpaper... wasn't really sure how hard or long to do it for, guess I'll find out soon enough.... Ended up applying the aged yellow base on the neck, really happy with how it has come up straight away...
Next I mixed the T-Bird white base coat with the turquoise and started applying that to the body, using the small circular motions and then wiping down the grain... Was quite surprised how thirsty the wood was. Some places took the paint quite well, but in a couple of spots it kinda refused to go on, so i suspect that there is a bit of glue on the surface... Think i might go over those areas pretty hard with sandpaper before the next coat... Any suggestion anyone?

http://pitbullguitars.com/wp-content...8-IMG_1101.jpg
http://pitbullguitars.com/wp-content...o-IMG_1105.JPG

Quote:

---

Quote from sav242 on May 2, 2013, 14:21
i suspect that there is a bit of glue on the surface... Think i might go over those areas pretty hard with sandpaper before the next coat... Any suggestion anyone?]

---

can you please take a close up photo of the areas you suspect there is glue and post it Sav ?
Don't worry about the slack in the neck pocket, that is standard so there's enough movement to get the neck lined up nicely with the strings

Savs, I think you have broken DB's rule 101 on sanding.....

You really must resist the temptation to rush ahead with your project otherwise you wont get the result you are after and you may end up disappointed.

There are plenty of threads here about glue problems and how best to fix these. Unfortunately, since you have gone a little ahead, some of the issues you may well have to live with. Post the pictures as Wokka suggested, it may just be 'polished' spots which are easy to fix...

Its always a good idea to start with a slightly courser sand paper and move up to a fine paper. This is to remove scratches on the wood surface. If you start too fine as you have done, it is very likely that you will not have removed the deeper scratches and these will show up in your finish. Given that you have also picked up what appears to be a glue problem. this isn't easily solved by sanding....you need to check the thread on glue issues and how best to sort them out. You really need to have sorted these before painting the guitar. Once the first coat is on it is harder to match the depth of colour.

I hope you aren't too disappointed, but the prep work is critical to getting a great result.

Gav

Ok, thanks guys, here's some close up photo's of the problem areas... Bear in mind that this is after the second coat now... So any diagnosis and tips would be very helpful, I'm patient enough and want to get this right ;-) I guess i just watched the videos on applying wudtone and jumped in without really knowing how to spot potential problems, but I guess it's all part of the learning curve hey... Once again, your help is greatly appreciated!

http://pitbullguitars.com/wp-content...3-IMG_1109.jpg
http://pitbullguitars.com/wp-content...7-IMG_1110.jpg

Hey guys, I'm up to the wiring stage... now... um... which wire goes where??? Sorry to sound stupid, but I've never done any wiring before and have no idea where the wires are supposed to be soldered to. I've got yellow,brown,red and orange wires coming out of the tone and volume pots, and I am assuming the have to go over to the pickup selector... Also have a long black wire and a short black wire, I kinda am guessing the long one will be earth wire? Sorry, can't seem to fins any info on this anywhere, hate sounding like a total newbie, but thats what i am I guess ;-) Cheers!

Sav,
Google Jazzmaster wiring diagrams & look @ images - there seem to be a heap online. Even ones with colour photos of what has been wired up to where.

Quote:

---

Quote from Brendan on May 27, 2013, 21:26
Sav,
Google Jazzmaster wiring diagrams & look @ images - there seem to be a heap online. Even ones with colour photos of what has been wired up to where.

---

Cheers mate, will do!

www.guitarelectronics.com have a wide range of wiring diagrams as well.

Have fun with the wires Sav!

Quote:

---

Quote from dingobass on May 27, 2013, 22:04
www.guitarelectronics.com have a wide range of wiring diagrams as well.

Have fun with the wires Sav!

---

okkaayyy then.... after a couple hours of research i am actually more confused than before... i think the part of my brain that is supposed to understand this may have been damaged a few years ago... Honestly i can'r see any way forward, think i may have to take this to the local music shop for advice... thanks though guys!

Quote:

---

Quote from dingobass on May 27, 2013, 22:04
www.guitarelectronics.com have a wide range of wiring diagrams as well.

Have fun with the wires Sav!

---

The only downside to GE is that they don't colour any wires, and the Isometric view makes it harder to see, but they work!

Finally done, here's a couple of photos of the finished product... She's playing very nicely, thanks heaps to everyone for all the advice along the way, am looking forward to the next build... Am think of the TL-90, wanted to go with the 335 but maybe my wiring skills need a little honing first...
http://pitbullguitars.com/wp-content...79zl-image.jpg
http://pitbullguitars.com/wp-content...0h0l-image.jpg

[quote]/<\\/p>[]<\\/p>/Quote from sav242 on June 25, 2013, 17:44
Finally done, here's a couple of photos of the finished product... She's playing very nicely, thanks heaps to everyone for all the advice along the way, am looking forward to the next build... Am think of the TL-90, wanted to go with the 335 but maybe my wiring skills need a little honing first...

Looking good now ... a triumph after your apparently shaky start.
Well done.

Sav,
Great looking guitar! You happy with how it sounds?

Hey that looks really nice Sav. Congratulations on your first build :)

rob

The sound is not bad, more importantly it feels really good to play though... Probably replace the pick-ups in the next month or so, but I've used it on a few recordings already and it sounds pretty decent....

Hey Sav's good to have you back! Glad that you are happy with your guit!

Way to go Sav!

Nice!

Sav - ultimately that's the winner - that you're happy with the outcome - if it feels nice and you can own it - great! Now time to enter it in GOTM...

Sav, that is a great looking Axe!!!