Apologies for making this n00b question it's own thread, but are there any goto alternatives to the Boss or Roland PSA in Australia? Can I just walk into an Altronics or equivalent and find something suitable?
Printable View
Apologies for making this n00b question it's own thread, but are there any goto alternatives to the Boss or Roland PSA in Australia? Can I just walk into an Altronics or equivalent and find something suitable?
Yes, but you have to get a negative to tip psu. Most of the altronics ones are centre positive. You could buy a plug and rewire, but it's easier to get the right item to start with.
Any music store should have some, and easy to find online for good prices.
Are you powering 1 or multiple pedals?
Sent from my moto g(7) using Tapatalk
Kosmic sound have this one, and you can find them online (eBay) for less than $20.
What jugglindan said...
Plus, whether running 1 pedal or 10, you need a power supply that will provide adequate amperage for the total amount of "current draw" that the pedal(s) will require.
Even an old model 9v Boss PSA (which was only 500mA) would be enough to easily power 5 or 6 "average" pedals.
It's fine have more power supply amperage (not voltage) than you need, but you never want less than your pedals total required.
I have a 2 Amp power supply (BOSS PSB-240A). I run 11 pedals including an active wah, and I still only "draw" less than 500mA.
Here are some links to power supplies that are suitable for guitar pedals:
Power Supplies @ Artist Guitars
Power Supplies @ SWAMP Industries
For $65 the PSB-240A is perfect for my needs and good value IMO.
Have a look at Swamp for sure.
Awesome, thanks for the directions gents.
For context, I currently have a single Boss pedal (SD-1), but am intending on making two or three additions soonish. Swamp did come up in my searches, so thanks for validating \m/
If you plan on using more than 1 pedal, I strongly recommend a good isolated power supply. It reduces the risk of one pedal adding noise to the power line that will then affect other pedals.
Having said that, I have a cheaper daisy chain PSU (Joyo JP-03) and it works fine with analog pedals. I have one digital pedal that makes everything noisy if connected to the same supply so when it's on the board I run it from a separate power brick. In hindsight I should have gotten an isolated supply.
Interesting. Would the Joyo JP06 noise blocker/isolator thing that Artist sell fix that?
It might, but I already had a few single outlet power bricks anyway so I used the solution that didn't require buying anything :)
That is it's intended purpose, but FWIW I wouldn't say it's imperative that you buy one unless you find you do have a problem.Quote:
Would the Joyo JP06 noise blocker/isolator thing that Artist sell fix that?
My power supply isn't isolated and I have never had a problem. (10 analog pedals + 1 digital)
You can buy multi-voltage plugpack adaptors from Jaycar Electronics, all you need to do is re-wire them so the DC plug has the correct polarity.
I have 2 other digital pedals on the common supply without issues. It's just one of my three digital pedals that's noisy.Quote:
Originally Posted by McCreed
Sent from my moto g(7) using Tapatalk
I have a Joyo Powersupply 2, 8 x 9v, 1 x 12v & 1 x 18v
Only have five pedals + Schaller wah, all 9v
Ok cool. I've ordered a Moen supply and daisy chain/adaptor bundle from Swamp. That should keep me out of trouble for now.
Sent from my Pixel 4 using Tapatalk
Swamp Industries are great. Good support too. I got a dodgy tuner pedal from them and they swapped it for a new one right away.
Most of the Jaycar ones now come with swappable tips. They also sell regulated 9v power packs as well 500mA, 1.7A ($24) and 3A ($30)Quote:
Originally Posted by DrNomis_44
I'm still having fun powering my pedals off USB power banks with a 5v to 9v step up adapter. Mains power hum is out of the equation.