Igor gets the Blues, The FrankenLab Reso Project.

Quote:

---

Originally Posted by wazkelly

Suppose if you have those sort of tools, why not. Turned out great and looks very professionally done.

---

Thanks Waz, it was a good little exercise, tad bit nerve wracking though.

The other little fix needed; when lining up the PUP two holes were in the right spot and two weren’t.
https://uploads.tapatalk-cdn.com/201...e931b81859.jpg

Errant holes filled, ready to be re drilled for accurate positioning.


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/201...825701d13c.jpg
https://uploads.tapatalk-cdn.com/201...a056584ed0.jpg

Well, we are committed to staying the course now! Damned Igor!


Sent from my iPhone using Tapatalk

Nice to see some movement on this one Frank.

Goddamn Igor!https://uploads.tapatalk-cdn.com/201...147260ae80.jpg
https://uploads.tapatalk-cdn.com/201...d1f67e8f06.jpg


Sent from my iPhone using Tapatalk

Envy. You have a new hub cap for the body-snatcher cart.

cheers, Mark.

Quote:

---

Originally Posted by king casey

Envy. You have a new hub cap for the body-snatcher cart.

cheers, Mark.

---

No, the cart got retired. Igor upgraded to a heavy lift drone last year.

So we set up and went for it on the preamp mounting.

https://uploads.tapatalk-cdn.com/201...7046660624.jpg
https://uploads.tapatalk-cdn.com/201...19641aabb7.jpg

The template was attached on packers to the taped off body by the masking tape and CA glue trick. This is not an approach for the faint of heart or weak of bladder!

So we ended up with this:

https://uploads.tapatalk-cdn.com/201...c184dc9245.jpg

https://uploads.tapatalk-cdn.com/201...0c10fef9fb.jpg

There are three cables that run off of this, the feed from the piezo, the battery cable and the jack cable. I toyed with the idea of running them straight down into the pup cavity and through the hole I’d drilled for the pup leads but elected to punch straight through to the soundwell instead.
https://uploads.tapatalk-cdn.com/201...d4da5ae061.jpg

Now I will need to sort out the cover plate and it’s mounting, then deal wth the battery box rout and all of the assorted electrickery that goes along with them.

Then, we will think about it’s headstock shape.


Sent from my iPad using Tapatalk Pro

always inspirational to see your projects Frankie.

Nice progress!