To add to the numbers
PRS kit with Mahogany body
Tonerider Rocksong Pickups
CTS Pots, Orange Cap & Fidelity Upgrade
Bone Nut
Gotoh Locking Tuners
Gotoh TOM Bridge
Cast Skull Tailpiece
Printable View
To add to the numbers
PRS kit with Mahogany body
Tonerider Rocksong Pickups
CTS Pots, Orange Cap & Fidelity Upgrade
Bone Nut
Gotoh Locking Tuners
Gotoh TOM Bridge
Cast Skull Tailpiece
At different finish shots. One with different knobs
killer PRS kit Tony, some nice touches to make this one different
Great looking piece of work there Tony. Beautiful combination of colors and very nice consistent grain on the back.
killer build Tony you really made the most of the flamed cap. So glad I'm not entering this month so many awesome builds
It's taken close to 4 months, but I've finally got it done! My first build, and it's taught me so much, have loved every minute of it (even if some of those minutes were spent yelling some pretty colourful words!).
My Spalt Maple LP Kit.
Undercoat: with ebony Timbermate
Finish: Dingotone Coolangatta Gold
5 (I think) coats of stain
3 Coats of intensifier
3 Coats of finish
Upgraded:
Tonerider Generator Pups
CTS pots
Orange drop caps
Gotoh 3-way switch
Switchcraft input jack
and (mostly) cloth wiring
I can honestly say I have been absolutely blown away with this kit. My expectations weren't all that high as all I wanted was a decent guitar that I could mess around with in my room - so long as sound came out, I would have been happy. What I got was a real quality guitar, I am so stoked with the Toneriders, their tone is unreal! I had the frets levelled and re-seated by a local guy in Melbourne and he did an excellent job for only $80 - John at Shub Guitars. She plays like a dream and isn't too hard on the eyes either ;)
I've had a few issues with the Dingotone not trying properly thanks to the cold weather we've had here over the past few months, however, again, John has given me a solution for that too.
http://res.cloudinary.com/djtbsud8r/...361_sgrhyb.jpghttp://res.cloudinary.com/djtbsud8r/...356_uwctvq.jpghttp://res.cloudinary.com/djtbsud8r/...352_c7uqkp.jpg
Why not throw this in the ring too.
EX-1 satin dark cherry finish (Ubeaut water based stain mix and Tru Oil). Added tummy contour, repositioned switch and reshaped headstock.
Extras:
-Tonerider Rocksongs
-Wilkinson EZ lok tuners
-Bourns pots
-Rotary bridge coil split
-Russian PIO tone cap
-Epiphone 3 way switch
-Bone nut
-Switchcraft jack
-cloth covered wiring
-custom 3 ply pickguard, truss cover and jack plate.
-Schaller strap locks
http://i.imgur.com/H9INmMIh.jpg
http://i.imgur.com/u09QEQXh.jpg
sensational effort Luke, the black hardware sets it off.
what was the solution with the dingotone?