That's looking a bit better.
Printable View
That's looking a bit better.
looking awseome Barge, are you going to drill a fourth neck screw hole ?
This will be a very cool build and would get the Max seal of approval for sure !
Yep, will be drilling another hole, obviously I'll have to make up a custom neckplate now so I'll worry about the 4th hole once I've jimmied that up.Quote:
Originally Posted by wokkaboy
Hopefully Max would approve, he's a pretty inspiring dude when it comes to thinking outside the box.
Looks nice man. Great lines.
Did you think any more about the upper carve and the veneer?
Cheers man.Quote:
Originally Posted by Nickosaurus
Because I haven't got a router table and am unable to rout downhill on the elbow cut, I'm gonna have to try and cut that particular section by hand using a blade.
There's every chance of catastrophic failure but I have no other option.
And that was a fruitful day of sanding. She's all taken back to 400 and looking nice
Now waiting on maple veneers now so I can make the top all pretty.
Looks amazing Bargey! Great lines...
cheers,
Gav.
pointy goodness, looks cool!
I thought you must have had/been getting a left handed version of thisQuote:
Originally Posted by bargeloobs
http://www.allparts.com/AP-0602-010-...te_p_4393.html
Thanks guys:-) @Gav,StanQuote:
Originally Posted by Fretworn
Yeah that's what I need Fretty, something along those lines. Unfortunately I didn't have any sort of contingency before I hacked that bit off the body so not sure what's happening yet, I'll probably just chop down the stock one. There's a fair bit of ad lib going on with this build:-)