Will do shortly mate. Stock pbg neck, dB bone nut, using the stock bridge and a gfs unit to reference. Gotta mow the lawn first. Been neglecting it th3 past few weeks and if I don't do it the wife will have me.
Printable View
Will do shortly mate. Stock pbg neck, dB bone nut, using the stock bridge and a gfs unit to reference. Gotta mow the lawn first. Been neglecting it th3 past few weeks and if I don't do it the wife will have me.
no worries Andrew, mow your lawns buddy. Maybe if you can please post the distance between E strings on the nut and compare it to a standard F type nut. I suspect the slots could be a bit wide if the bridge and neck are standard
I had that feeling too but I can't bring myself to doubt db's work.
So from e to e on the nut is 38mm, nut width is 42mm, and the bevels come. In about a mm each side leaving a mm on each e between the string edge and the bevel if the fret end. Will post pics shortly.
no worries Andrew, please compare the 38mm to a PBG F type nut, got a feeling the slots are a bit wide
Mate I destroyed the nut when I took it out so I don't have the tele one. Would the nut on an St kit be the same?
http://tapatalk.imageshack.com/v2/14...844a2272d6.jpg
Here is the spacing at the nut.
http://tapatalk.imageshack.com/v2/14...a33987367e.jpg tl spacing with bone nut
http://tapatalk.imageshack.com/v2/14...fc6484314b.jpg St spacing with stock pbg nut.
So the bone nut is 38/9, plastic is 34/5
yeah Andrew as I thought. The ST and TL nut should be the same spacing. You better flick DB an email and ask for 34mm spacing between E strings. You can clearly see the 38mm spaced nut isn't going to work