Wokkas SGD-612 double neck SG

Woks, Tim, send me an email message and I will send you a detailed dual neck wire-up.

@ Gav --->cheers Thanks Gav, not sure how good the wiring diagram I posted is. Gav is the diagram Tim sent got 2 or 3 switches ? I'm after the epiphone 3 switch diagram thanks

@ Tim ---> thanks for the nice comments on the SGD and PBH bass

Thanks Gav that's going to help me heaps . As Wokka mentioned these kits have 3 3way switches. Also need an email address to msg.

Quote:

---

/<\\/p>[]<\\/p>/Quote from Tim on July 17, 2013, 14:21
Thanks Gav that's going to help me heaps . As Wokka mentioned these kits have 3 3way switches. Also need an email address to msg.

---

Hi Tim, if you post your email address on this thread, I'll send an email to Gav so he can reply with the wiring diagram. When I've got your address I'll let you know and you can edit the post and remove your email address if you like

timmetcalf@live.com.au cheers Wokka

ok got your email address Tim, just sent an email to Gav with you copied in. I didn't realise it was the Tim I'm sure I met at DB's man cave one Friday afternoon

good luck with your build, post some photos in the build diary

Small world eh Woks? :)

Sure is a small world DB. Got silver highlights on lastnight and a top gloss coat on tonight. No point taking photos with a Flash but will post some pics in daylight on the weekend. Silver highlights look great on the ama purple!

Come to this late, but I've got both of the schematics too. The 3-sw Epiphone and 2-sw Gibson, if you're stuck?

However I just looked at the switches supplied and they are all single pole, and all appear to be on/on/on (x-over). That's fine for the p-up selection but not for the neck selector, that should be on/off/on.

Needless to say this does not match the EP or Gib spec., but can be made to work. However it might require using ground-switching, which seriously raises the complexity of the cct - given the presence of so many easily contactable earthed objects on the un-selected neck.

However it can be made to work.

Wokka wiring on my twin neck is well on its way now .I have found there is alot of wires running through the pup cavities, something we spoke about today .so what I have done is to trench out along base of cavitys so I can recess the wires then I will shield over top . Have chucked in a photo (I hope)mmm maybe not anyway you get the idea....now this is were someone tells me one its already been done or two this cant be done because of something...LOL
http://pitbullguitars.com/wp-content...721_201503.jpg
http://pitbullguitars.com/wp-content...721_201503.jpg