McCreed certainly got the kg part completely right!Quote:
Originally Posted by fender3x
Printable View
McCreed certainly got the kg part completely right!Quote:
Originally Posted by fender3x
Slow and steady progress..round overs and neck screw ferrule positions.https://uploads.tapatalk-cdn.com/202...e93ec7f3b2.jpg
String thru musings and DC scratch plate rough fernanglinghttps://uploads.tapatalk-cdn.com/202...c67c6f6987.jpghttps://uploads.tapatalk-cdn.com/202...93f3445ddb.jpg
What method did you use for the string-through? Or do you have a drill press? I don't remember...
Looks pretty tidy!
Cher bro! I do have a DP but I still employ the half each side method. Position the bridge, either screw in or double sided tape down. Do the outer 2 holes right through with Brad point tip. Then the other 4 holes half way. Flip 'er over and align the bridge with the outer 2 holes and double sided tape down. Before I drill the other halves of the 4 holes on the rear, i use the Brad point as a punch for insurance that it will take straight and minimise wander.Quote:
Originally Posted by McCreed
Yep, nice and tidy.
Also liking the cheeky shot in the background with the mounting rings in place.
Sent from my Pixel 4 using Tapatalk
Taking a leaf from the @Simon Barden playbook. Errrrr....I mean spraybookhttps://uploads.tapatalk-cdn.com/202...473f17c732.jpg
Neck is coming up a treat with the homemade truoil.https://uploads.tapatalk-cdn.com/202...5a1ec58cfa.jpg
https://uploads.tapatalk-cdn.com/202...877260cba3.jpg
Ooh, lovely. Touch drying times are comparable?
Sent from my Pixel 4 using Tapatalk
At this stage they are, yes mate.