Ha haha it has a Regina
Printable View
Ha haha it has a Regina
O.K. it's a humble Epiphone, but $5,500 will get you 55 of them and change left over.
Attachment 29410
cheers, Mark.
I have the same kit coming to me in Colorado US. I hope I dont have to worry about shipping here. Service has been deteriorating as well. I don't know what the exchange rate is US to AUD but Stewmac has a large stock of headstock veneer. Best to always buy local if you can.
Loon
I ended up staining the headstock rather than use a veneer.
Sweet! I am going to have to ramble through the threads to see if there are implications of adding 2.3 mm of material to the headstock when considering tuners, nut string height etc. (The Junior was supposed to be a student guitar!) Staining may be the way to go for me also?
Staining probably easier
https://uploads.tapatalk-cdn.com/201...8bc030d3d3.jpg
Fretwork tonight. Leveled, recrowned and polished.
Few thing done one the Junior lately
https://uploads.tapatalk-cdn.com/201...654cfb5566.jpg
Grovers installed
https://uploads.tapatalk-cdn.com/201...c0d8e019b9.jpg
New bone nut installed
https://uploads.tapatalk-cdn.com/201...9d95199a58.jpg
Neck set - as my first set neck, this was a little scary!
https://uploads.tapatalk-cdn.com/201...dbc72c739f.jpg
Wiring harness done - CTS pots and Sprague Orange Drop Cap
Next item is the GFS pickup I have coming
Looking really nice mate. That builders string works really well for aligning necks.