-
Well here's a start, I decided it needed some pin-striping. Autobarn has a huge range in various colours at the moment.
Still waiting to hear back from the place I'm getting the vinyl cut. I decided to try somewhere local rather than having it sent down from Darwin... they don't seem in much of a hurry to help me out though.
I put it on using a bit of soapy water so it's not fully stuck down in a couple of spots, I'll run over it with the hair dryer later on and it will all sit down and smooth out.
https://i.imgur.com/7SDNhGf.jpg
https://i.imgur.com/nKGLtFE.jpg
https://i.imgur.com/a4Bjp37.jpg
-
-
Spoke too soon, vinyl came through this afternoon. Looks cool, probably gone a bit overboard, but the build is an experiment after all :)
Few coats of clear after the vinyl settles down and I'll be ready to throw it together.
https://i.imgur.com/W5o8cQx.jpg
https://i.imgur.com/cCIhTUE.jpg
https://i.imgur.com/rVSdkwZ.jpg
https://i.imgur.com/bPaxa9J.jpg?1
https://i.imgur.com/vYWUtvB.jpg?1
-
-
That looks very cool indeed.
-
You have to be pretty well pleased with that! Well done mate!
-
Cheers guys, it is good fun. The overall build isn't what I would consider up to my standard, but it has been worthwhile as a test bed.
Did a quick clear coat this morning, but got some fluff in it, so will need to wait for it to dry to fix up. Really need to work out a better spraying setup. I've only been threatening to do it for a year and half :rolleyes:
-
Looks fantastic. Bodge or not, that's going to be a very impressive finished product.
Sent from my SM-G955F using Tapatalk
-
omg sonic, luthier i say ! :cool:
-
