Looking nice Gav - but is the neck pup a little Julia (left of centre)? I can't tell if it's loose or if it's parallax that's giving me the "not quite right vibe".
Printable View
Looking nice Gav - but is the neck pup a little Julia (left of centre)? I can't tell if it's loose or if it's parallax that's giving me the "not quite right vibe".
I can see what you mean as well, but I find it hard to judge in photos of guitars that have carved tops.
Haha, no, it's dead straight and dead square....
I run two 600mm rulers from the neck at 90 degrees to the frets before fixing them to the body. Might just be the light. Also remember that they are recessed at the moment and will only be set once the strings are on! :)
yes never question the intonation master Gavmeister !
yeah! That's right! :)
or he might change your posts to look like this....
Quote:
/<\\/p>[]<\\/p>/Quote from Fretworn on January 9, 2014, 10:08
I promise to send all my guitars to Gavmeister and Woks for safekeeping.
Quote:
/<\\/p>[]<\\/p>/Quote from Brendan on January 8, 2014, 22:54
I promise to send all my guitars to Gavmeister and Woks for safekeeping..
The dowel plugs glued into place and then drilled to receive the machine heads. Nut shaped and marked in preparation for the baritone Strings!
http://www.pitbullguitars.com/wp-con...7wl8-image.jpg
The saddles on the bridge i purchased privately had only the thinnest grove, so these had to be filed to size to (as opposed to only worrying about the nut) ! Double work! Mutter, muttter!
http://www.pitbullguitars.com/wp-con...1fz2-image.jpg
wow thats come up a treat Gav, can't wait to hear this one
Looks like it's almost there Gav. Really hanging out to hear those low vibe tones. I love some of the 'surf' tunes done on a baritone. It's going to be so cool.