Printable View
No touching for 2 dayshttps://uploads.tapatalk-cdn.com/202...b3e209b34d.jpg
Scraped binding, refinished body edges, fitted neck checking strings are even from the edges, pickup guard fits and enough intonation adjustment available. Still a bit worried about the action height but can still achieve Gibson factory settings for this scale length.
Sent from my iPhone using Tapatalk
Hopefully you've removed those strings whilst the neck glue is drying. Leave it clamped for 24 hours, and then leave it alone and unstressed for 24 hours and the neck should should be well and truly attached.
Not removed but loosened with no tension. Is that ok?Quote:
Originally Posted by Simon Barden
Sent from my iPhone using Tapatalk
I'd have totally removed them to remove any doubt, but if they were totally slack, then fine.
Lovely looking colours. Nice work fixing those glue spots.
https://uploads.tapatalk-cdn.com/202...7223ef44ba.jpg
https://uploads.tapatalk-cdn.com/202...aa6e1a16cc.jpg
Bridge posts installed, bone nut filed down and glued in, basic setup to check if action height is acceptable and looks ok. (Removed bridge adjustment screws and intonation was perfect with factory bridge settings)
Cleaned up glue around neck join and refinished edges and binding (seems like a never ending task)
Ordered locking posts on Simons advice as the bridge is tilting forward under tension
Tomorrow start my tru-oil regime. 30 coats
Sent from my iPhone using Tapatalk
Top work there!
Grab yourself some locking posts, they will keep your bridge straight and really help to transfer vibrations to where they need to go.
https://www.ebay.com.au/itm/LOCK-DOW...154756-20017-0
AU $13.78 12%OFF | KAISH Guitar Locking Tailpiece Mounting Studs Locking Stop Bar Posts Wraparound Bridge Locking Posts Chrome/Nickel/Black/Gold
https://a.aliexpress.com/_mrcG5y0
Depending on which set you get, if they come with the cheap Allen key screws, replace them with some Phillips head screws of the same thread. Just go to a bolt shop and you'll be sweet. Or let me know and I may have some lying about from my past endeavours [emoji3]
Thanks for the tip and offer. I have ordered the Kaish ones from Amazon which will take a few weeks to arrive. Out of interest why are the Allen key screws bad ?Quote:
Originally Posted by Bakersdozen
Sent from my iPhone using Tapatalk
Nothing wrong with them at all if made of a strong metal, but these ones are soft and strip/round the hex socket easily.
For me, the heads just tended to strip very easily. They might be okay if you use a decent Allen key , but you don't want to get the head stripped while they are locked in place and wish to remove them. Not a fun job.Quote:
Originally Posted by mrpearson