Printable View
No worries Colin.
Impatient to wait for the switches to turn up, so decided to wire it without a switch.
Just wired the bridge pickup to the pot.
Bridge probably could go back a couple of millimetres (yeah I know but I had to check for myself hehe) so I'll do that after routing out the cavity for the switches.
Attachment 35931
Just fitted the Chinese strings for now (Ernie Ball ones were not included this time).
Attachment 35932
After that comes the extended 'finishing' stage.
cheers, Mark.
Looks great man.
Thanks SM.Quote:
Originally Posted by Sonic Mountain
cheers, Mark.
There doesn't seem to be a very wide range of adjustment on those bridges before the spring is really compressed. If you move the bridge back a couple of mm, then it looks like the high E saddle (at least) could really do with a longer adjustment screw.
Thats beautifulQuote:
Originally Posted by king casey
Sent from my iPhone using Tapatalk
Are you using the kit pickups or upgrading?
And, looking good too. Can't wait to see the stain on there.
Thanks Oli, and McCreed I'm using the kit pickups for the time being.
Right again Simon. This is the same size bridge that came with the kit.
When I move it back I'll use a couple of saddle screws salvaged from Tele Squier.
If they prove a tad long I can cut a bit off.
Attachment 35946
cheers, Mark.
How about a rough demo?
https://youtu.be/p77kfM4JtyU
cheers, Mark.
You’re a man of action, Mark. Not wasting any time. Sounding good already.
Cheers DarkMark.Quote:
Originally Posted by DarkMark
Blow the dust off the JVC video camera, search high and low for the power cords. (battery died yonks ago).
Re-install Movavi video editor...and then another search for the activation key.
A bit of editing and then the interminable wait for uploading to youtube.
Another day at the office :)
cheers, Mark.