New Build TLA-1

Quote:

---

Originally Posted by Bakersdozen

M20 bolt epoxied to some flat wood. 14mm hole works great!https://uploads.tapatalk-cdn.com/201...4ec05a4f0c.jpghttps://uploads.tapatalk-cdn.com/201...cb6c7c11d1.jpg

---

Nice one mate 👍🏻

https://uploads.tapatalk-cdn.com/201...1f00c06e57.jpghttps://uploads.tapatalk-cdn.com/201...199aad9113.jpg

Whipped up this little holder for all my gauged saws from stewmac. Onto the chisel holder tomorrow


Sent from my iPhone using Tapatalk

Finished sanding tonight. Ive wet the body so I'll give it another sand tomorrow. Hopefully my shellac should turn up on wendesday so I can spray the body ready for grain filler

Change of plans now also. This is going to be a Butterscotch finish now, not a paisley.




Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/201...2d23b2a2ed.jpghttps://uploads.tapatalk-cdn.com/201...74a63a2332.jpghttps://uploads.tapatalk-cdn.com/201...9e726e6b9f.jpg

Sprayed a couple of coats of shellac. Will let it sit for 24 hours before I sand and begin grain filling, which is definitely my most hated part of guitar building lol


Sent from my iPhone using Tapatalk

McLovin the work station mate. You'll be stacking up the builds soon

Quote:

---

Originally Posted by Andy40

McLovin the work station mate. You'll be stacking up the builds soon

---

Thanks mate. I've built quite a few in thr past but this is my first in probably 3 years. I've Got 3 or 4 half built laying around lol


Sent from my iPhone using Tapatalk

Soooo back to a pasiley https://uploads.tapatalk-cdn.com/201...1ac621b57b.jpg

I was going to bind it top and bottom but thinking I'll burst instead now

Not sure what's the best finish to go with but
Has anyone used ironlak or similar graffiti paint? They've got great colours available.


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by vaxis85

Has anyone used ironlak or similar graffiti paint? They've got great colours available.

---

I've had good results with it.
Also belton Molotow which has a better range of colours.

cheers, Mark.

Quote:

---

Originally Posted by king casey

I've had good results with it.
Also belton Molotow which has a better range of colours.

cheers, Mark.

---

Cheers, did you use their clear also? I'm thinking I'll clear over the vinyl, then spray the burst, then clear again


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by vaxis85

Cheers, did you use their clear also? I'm thinking I'll clear over the vinyl, then spray the burst, then clear again


Sent from my iPhone using Tapatalk

---

Yes I used a couple of cans of their clear gloss.
Attachment 30139

cheers, Mark