They will be face mounted per Experiment number 2. The recessing won稚 be as severe as there is only a 10mm top plate.Quote:
Originally Posted by Brendan
Sent from my iPad using Tapatalk Pro
Printable View
They will be face mounted per Experiment number 2. The recessing won稚 be as severe as there is only a 10mm top plate.Quote:
Originally Posted by Brendan
Sent from my iPad using Tapatalk Pro
Wabi sabi? Not familiar with kintsugi, will need to study.Quote:
Originally Posted by Simon Barden
It is a relatively moot point though as over night this happened:https://uploads.tapatalk-cdn.com/202...b1a7b2e893.jpghttps://uploads.tapatalk-cdn.com/202...a5d55e1242.jpghttps://uploads.tapatalk-cdn.com/202...c7a7f35e38.jpghttps://uploads.tapatalk-cdn.com/202...5aa4ef5bc0.jpghttps://uploads.tapatalk-cdn.com/202...9d296f28c2.jpghttps://uploads.tapatalk-cdn.com/202...37951645cf.jpghttps://uploads.tapatalk-cdn.com/202...348a31ff26.jpghttps://uploads.tapatalk-cdn.com/202...1c6a41624e.jpghttps://uploads.tapatalk-cdn.com/202...f97907c24f.jpg
Sent from my iPad using Tapatalk Pro
Nice patch! Kintsugi is usually used in regards to pottery. If a piece breaks it is repaired, often with gold to fill the cracks, to make the repair a feature of the piece - like this:
https://encrypted-tbn0.gstatic.com/i...yvvSPUYHNEonUO
Quote:
Originally Posted by Sonic Mountain
oh okay, not sure I can afford the gold for Kintsugi. I値l do it with timbermate....skintsugi.
I値l shut the door on my way out.....
https://i.kym-cdn.com/photos/images/...97/718/c5f.gifQuote:
Originally Posted by FrankenWashie
Well fixed sir!
So in the spirit of trying to get as many things done as possible in the stolen moments I have, there was some hurly Burly happening in the lab this afternoon.
https://uploads.tapatalk-cdn.com/202...f1ebd422ad.jpg
https://uploads.tapatalk-cdn.com/202...6bbe174b1a.jpg
The mahogany base is 37.5 mm, the burl cap is 20mm which should leave a nice margin for a carve and a tapering toward the neck pocket.
At this point due to some of the earlier whoopsie moments in the build, the rear will be black, which should highlight the beech laminate neck (assuming that is is stable enough after shaping).
I知 going to attempt to pare down some of the left over burl for a HS faceplate. That may not work given the nature of the burl, but we値l have a crack at any rate.
Sent from my iPad using Tapatalk Pro
Wow, very nice. I thought hurly burly was what happened after a very big night? I'm glad I was wrong!
Holy moly! What痴 the burl, FW?
Burls just wanna have fun.