-
Hey Michael, flaming in the neck sometimes maple has a flame effect in the grain ie like the flame maple veneer kits, the grain actually looks like fire flame shapes.
you have to be patient to get the best finish mate, DB always reminds us that the finish is the most important part of the build and you will be rewarded for taking your time with a guitar that will last for many years and still look good.
easy to fix the temptation of bolting the guitar together, get another build on the go, it's called GAS hahah
The build is looking excellent by the way !
-
Blowing the dust off this thread...*deep breath*
I finished and assembled the guitar late 2016, and was pretty happy with it. It came up a treat! A few issues with the frets, they need a proper levelling. But otherwise ok.
But then design creep kicked in...more on that to comehttps://uploads.tapatalk-cdn.com/201...644ee9b364.jpghttps://uploads.tapatalk-cdn.com/201...8775566ea2.jpg
Sent from my A0001 using Tapatalk
-
That looks great Michael. I don't know if I'm happy or anxious about your "design creep" statement. I love it as it is.
-
Strings have been removed because I plan to level and recrown frets this weekend, but for now...
This is the result of some design creep. Always loved the look of teles with a bigsby, so that had to go on. Replaced the saddles with threaded saddles.
The neck pickup is a cheap filtertron style humbucker. Switch is 5-way start switch, with
1. Neck humbucker
2. Neck single coil + bridge (parellel)
3. Neck humbucker and bridge
4. Neck single coil + bridge (series)
5. Bridge
Pickups sound great, but was hard to pickup and play because of the frets. Fixing that this weekend hopefully! But I love the look of it, bit different from the TL-1 I had in mind originally
https://uploads.tapatalk-cdn.com/201...205ddecb78.jpghttps://uploads.tapatalk-cdn.com/201...2e1433c388.jpghttps://uploads.tapatalk-cdn.com/201...869b95e0db.jpghttps://uploads.tapatalk-cdn.com/201...582b0db520.jpg
Sent from my A0001 using Tapatalk
-
Top notch Tele Michael, the fret job will be the icing on the cake
Sent from my iPhone using Tapatalk Pro
-
Yeah great job with the bigsby and string through
-
Phew! Nicely done. Great customisations.
One question, why are the bridge pickup screws standing up so far? Surely they should be sitting down against the bridge plate.
-
Good spot fretworn, they should be flat..if I used the correct screws. I lost the original screws that came with that pickup, so I used the screws I had on hand, which were countersunk, hence them poking up the top.
Sent from my A0001 using Tapatalk
-
How does string through and bigsby work?
I always thought Bigsby's were strung from on top through the rear most round tube?
-
Good pickup. I just feed the strings normally through the bigsby, leaving the string through holes unused
Sent from my A0001 using Tapatalk
