hang in there Andrew, interesting to see the results of the various inks
Printable View
hang in there Andrew, interesting to see the results of the various inks
I did discover that if using rag method just on top of the ink it dragged it all over the place whereas when brushed on the coat did not and preserved the ink finish. Only went back to rag finish once brushed on coat had plenty of time to cure. DT is that watery that it can be brushed on as I found out on scrap timber samples when blending colours on the EX-5.Quote:
Originally Posted by Andy40
DT goes ok over sign vinyl. I had problems with a lack of patience and putting to much DT on, so had to sand it back a few layers. The vinyl sanded back with with DT and should sit slightly more level with the surrounding surface.
Good tip for future reference.
Ordered some Dark Stars to go on this beast.. why does the post always have to take so long?
Like these?
Attachment 12013
Highly recommend the coil split as you get plenty of useful sounds. Great sounding PUP's for the price and hope you like them. Pity there is stuff all sound clips anywhere to be found for them to help with choosing which ones. At least Tonerider do and that helped me when choosing PUPs for my EX-1.
The Dark Stars are nice, like waz said, split them and get a heap of nice tones, I have them in my GD-1.
Exactly like those. Push-pull volume pot ordered as well. I was looking for some wiring diagrams for 2 HB's, vol, tone and switch with coil-split but will probably use the same system I have in my Pacifica where the push-pull just earths the centre tap.
http://www.guitarelectronics.com/pro...e0Tone001.html
thats the wiring diagram I used
Yeah, I saw that one. I'm going for a single split switch. I considered putting in a phase switch but sometimes there are too many things to play with on a guitar instead of just playing music. Their circuit uses north coil on the neck and south coil on the bridge, mine used north on both and switches both on/off at the same time.