good stuff Ponch, I'll be using the DT mark 2 clear on my uluru tele soon, can't wait to try it
my 32 ounce TO bottle is cactus so I need to try get myself out of the naughty warehouse - good luck Woks !!
Printable View
good stuff Ponch, I'll be using the DT mark 2 clear on my uluru tele soon, can't wait to try it
my 32 ounce TO bottle is cactus so I need to try get myself out of the naughty warehouse - good luck Woks !!
Built a jig this afternoon to press in the machine head bushings. Total cost 70 cents. One quarter inch bolt, 2x washers, one nut and some scrap wood with a hole drilled through it.
http://uploads.tapatalk-cdn.com/2016...fef869ca61.jpg
And a video of the jig. The vintage sized bushings are very tight..
http://youtu.be/hCFwYCGDsjY
Sent from my iPad using Tapatalk
Clever Andrew.
Update picture, quick mock build to check all ok..
The tape is to hold in the pickguard and not an EVH effort
http://uploads.tapatalk-cdn.com/2016...86575ad657.jpg
Sent from my GT-I9506 using Tapatalk
looks great Ponch, what is the reverse headstock like with the longer run of the wound strings ?
I reckon a EVH surf strat could look cool ? haha
Are you putting a headstock logo on ? You know the judges will knock off a mark if there's no logo haha
Feels a bit weird Woks. You don't have to bend strings so far on the treble side. As I'm a leftie in all but guitar playing the upside down machine heads feel normal!
Decal, I'll end up veneering the headstock (to cover drill through better) so will wait until then.
Sent from my GT-I9506 using Tapatalk
haha ok sounds good Ponch. I'm also a lefty but do many things right handed - guitar, scissors, golf/cricket bat (Mosrite haha) and PC mouse !
look forward to seeing the headstock veneer