Ahh! No need to wax first then.
In Miami flip flops are called "chanclas" which is a Spanish word derived from the sound they make.
Sent from my ONEPLUS A3000 using Tapatalk
Printable View
Ahh! No need to wax first then.
In Miami flip flops are called "chanclas" which is a Spanish word derived from the sound they make.
Sent from my ONEPLUS A3000 using Tapatalk
The top is looking amazing 👍
Ready to clear coat. Decided to go with a darker tone of the blue on the back. Laid down a black base, and went over that with a couple coats of blue. Got a bit of texture running through now.
https://i.imgur.com/A5RISlZ.jpg
https://i.imgur.com/BeIfP6E.jpg
https://i.imgur.com/S3ExwiC.jpg
https://i.imgur.com/JZvTpEC.jpg
For the neck, I'll keep it natural, but I've ordered some headstock veneer to give it a similar effect to the top.
Sent from my Pixel 4 using Tapatalk
Your binding cleaned up nicely.
What are you planning for the neck?
Currently thinking about either tinting the poly with some walnut stain, or a very light stain then poly. The neck is mahogany, so it will have a bit of colour, but I reckon it will need a little bit of assistance. The U beaut cedar dye is a bit boring, but a dash of orange or red should bring it alive.
Sent from my Pixel 4 using Tapatalk
First coat of home brew poly.
https://i.imgur.com/Wkv0Tqb.jpg
Sent from my Pixel 4 using Tapatalk
That is very good work DM.
Can't offer any advice on the neck as haven't done a 'hog neck yet.
Grant
Here's mahogany neck I did with just Tru Oil:
Attachment 39802
I know the colour in mahogany can vary quite a bit, but I love the colour on this one.
I do like the feel of Tru Oil on a neck, but I've since come to like satin poly more. If I were doing it now, I think I might do a few coats of Tru Oil then do a satin poly over it. Maybe that's an option for you also.
edit:
BTW, I'm suffering major envy over that blue quilt! Noice!!!
Oh hi, it's been a while...
Been fart-arsing around with the headstock, but it's annoyed me so much that I put this project down for a long time.
Over the last week I got stuck into sanding and polishing the body though. Here is what will keep me going.
https://i.imgur.com/VPvxi82.jpg
https://i.imgur.com/XhSgw4C.jpg
https://i.imgur.com/3Dnxlyj.jpg
https://i.imgur.com/GhuPal9.jpg
Wet sanded 320, 400, 800, 1200, 1500, 2000
Micro mesh 4000, 6000, 8000, 12000
Meguiar's Ultimate Compound x 3
Meguiar's ScratchX x 2
Bowden's Carnauba Body Wax x 2
Bowden's Fully Slick x 1
(Hat tip to ozzbike).
I'm in love again.
Sent from my Pixel 4 using Tapatalk
The whole thing looks great, but that top is absolutely stunning! Nice work Dozy.